What Is an Online Inkjet Printer? Conveyor, Trigger, Speed

Last Updated: 2026-11-12

A code half an inch off centre on every tenth case still fails an audit. An online inkjet printer removes that variation by firing from a sensor, so the mark depends on the line rather than on a wrist. Three measurements decide whether that works.

The Trigger Chain

A sensor sees the product, waits a set delay and fires the head. Three numbers define the whole chain: the distance from sensor to head, the delay in milliseconds, and the speed the line actually runs.

Get the delay wrong and every code shifts by the same amount, which is easy to spot. Get it right at one speed and run faster, and the codes drift forward until they land on a fold.

Why an Encoder Beats a Timer

A timer assumes the belt moves at a constant speed, and belts rarely do. An encoder measures the surface and places each dot by distance, so a line that surges between packs still gets the code in the same place. The signal chain is described under ISO 9001.

That is the difference between a mark that passes an inspection camera and one that needs a tolerance nobody wrote down.

Mounting an Online Inkjet Printer on a Conveyor

The bracket is where most projects lose time. A head needs a rigid arm, a clear throw to the product, and enough room on the operator side to change a cartridge without unbolting the guard.

The throw that suits the job sets the arm length. A two to five millimetre throw keeps the head close in, which on a narrow rail is often the only way the unit fits at all.

Where an Online Head Loses

Low volume with long gaps belongs to a gun. A mounted head on a line that runs an hour a week spends most of its life idle, and idling is what dries a print face.

Odd shaped products are the second limit. A head can follow a flat face or a cylinder on a rotary axis, but a bundle of loose parts needs a fixture the line does not have, and a conveyor is defined by its drive rather than by its frame under conveyor belt practice.

A Head That Covers a Wide Face

online inkjet printer - S10-4 online inkjet printer standalone

S10-4 online inkjet printer (standalone)

four heads on one bracket for a fifty millimetre block:

  • 2-50.8mm print height
  • 2-5mm throw distance
  • Prints Chinese, English, date, QR code and barcode
  • Marks metal, plastic, pipe, foam and carton
  • Industrial Grade Standard Pro

Fifty millimetres of height on one bracket is what lets a single station carry a date, a batch and a data grid without a second mounting point, which is usually the difference between a clean install and a bracket on a rail.

Related Questions

Does an online head need its own compressor
Not for a cartridge head. A valve head or a large character unit usually does, and that decides where the unit can be sited.
Can one head print on both sides of a case
Only with a second head facing the other way, and the second trigger has to be timed independently of the first.
What happens when the line stops
The head idles. A short stop is harmless, an overnight one needs the print face capped or wiped, which is the same habit a gun needs.

Send the Rail and the Speed

Measure the rail, note the speed at the marking point and photograph the product. We return the throw, the trigger gap and the bracket height, so the online inkjet printer you fit lands the code in the same place on every case.

Next Steps

Need help choosing the right printer?

Talk to our engineers for a free production-line assessment and quotation.

Request a Quote

Which product category would best serve your current business needs?