Last Updated: 2026-11-12
A carton that reaches the customer with a faint code comes back as a claim. A large character printer answers that with twenty five to sixty millimetres of mark, legible from a forklift, and it gets there with a different fluid and a different firing method than a small character unit.
What Counts as Large Character
The category is defined by height, not by speed or by price. Anything from about twenty five to sixty millimetres in a single pass belongs here, which covers a shipping case panel, a drum side and a timber bundle.
That height changes the physics. A character made of large droplets cannot hold fine detail, so the design goal moves from sharp edges to a mark that stays readable after a rough pallet ride.
How the Mark Is Built Without a Fine Nozzle
Most units in this class fire on demand rather than deflecting a continuous stream. A valve opens for a set time and releases a slug of fluid, so the dot is large, the head is simple and the maintenance is a wipe rather than a wash.
The trade is speed and detail. A valve head prints a few hundred characters a minute and cannot shade a logo, which is why it survives dust and rough handling that a fine head would not. The firing method is described under inkjet printing.
Why Porous Ink Changes the Choice of Surface
Corrugated board drinks fluid. A porous fluid soaks in and dries by absorption, so the mark needs no heat and no dwell time, and it stops looking wet before the case reaches the pallet.
The same fluid is poor on a glossy film or a coated drum, where there is nothing to absorb it. That is the most common misapplication we see, and export builds carry paperwork under ISO 9001.
Where a Large Character Printer Runs Out
Anything that needs a barcode, a fine logo or a line of six point text is out of scope. The droplet size that makes the mark survive transport is the same droplet size that blurs a narrow bar.
High line speeds also test the class. A valve head on a case passing at two metres a second leaves a character that leans, so speed and character width are checked together.
The Handheld Build for a Case Face
AL16 Large character inkjet printer
a one point six kilogram gun for panels that never reach a conveyor:
- 25-60mm print height
- 3.5-inch Capacitive Touch Screen
- Weighs only 1.6 kg
- USB, Wireless, Network Port connectivity
- Built-in air pump ink supply
The built-in air pump is the detail that matters on a gun. Consistent supply pressure is what keeps a sixty millimetre character solid from the first case of a shift to the last.
Related Questions
- Can it mark a timber pallet
- Yes, and porous fluid is the right choice there, since sawn timber absorbs it without smearing under a strap.
- Is a two line block possible
- Within the height limit, yes. Two lines of twenty five millimetres need a head rated for at least fifty, so check the spec rather than the sample.
- Does cold weather affect the fluid
- It thickens it. Below about five degrees the gun needs the fluid at room temperature, so store cartridges indoors through winter.
Send the Case and the Line Speed
Photograph the panel you need to mark and tell us how fast the case passes. We match the height, the fluid and the pump setting, so the large character printer you fit produces a mark that survives the pallet, the truck and the customer.
Next Steps
- Which jobs suit the class: four jobs a large character unit fits.
- The short comparison: what a large character printer is used for.
- Start at the contact page, on +86 17625427465 or kuangcy@126.com. We reply within 24 hours.
Need help choosing the right printer?
Talk to our engineers for a free production-line assessment and quotation.
Request a Quote