Last Updated: 2026-10-29

Searching for an alternative to Diagraph usually starts with a quote that came in higher than expected, and the mistake is to compare invoices rather than platforms. A continuous inkjet coder is a pump, a print head and a fluid system, so the real comparison is which of those three you can service locally for the next five years.

Why Buyers Look for an Alternative to Diagraph

The pattern we see is not dissatisfaction with the mark. Diagraph has a long record in coding and marking, and a coder that has run for years is evidence of a mature platform rather than a problem. The trigger is usually the total cost of ownership once freight, service visits and fluid consumables are added up for a line outside the brand’s densest service region.

That is a commercial argument and it should be tested commercially, not emotionally. If the existing machine marks well and the parts arrive on time, the honest advice is to keep it, and the alternative conversation is worth having only when one of the five tests below fails.

Five Tests Before You Switch Platforms

Test How to run it What failure tells you
Model fit Match character height and line speed No equivalent model for your block
Fluid band Compare viscosity range, not brand names A grade that will not key to your substrate
Spares cycle Ask which parts are held for five years Consumables only, everything else on order
Signed sample Mark your product, read it, sign it A demo part that is not your part
Downtime window Count the hours to swap and re-qualify A changeover that needs a shutdown

The fifth test is the one that decides the date of the switch. A coder swap on a single line can be a weekend; on four lines with an audit trail it can be a quarter, and the plan has to name who signs the first production batch after each line is changed.

The second test deserves a note on how to read fluid data. Viscosity band and dry time matter; a grade that is chemically close but dries slower will smear on a coated carton and no amount of head cleaning fixes adhesion.

Fluids, Spares and the Service Radius

A continuous inkjet system circulates fluid all day, which is why the fluid supply chain is part of the machine rather than an accessory. Ask for the grade list in writing, the pack sizes, and the lead time to your port. SHICAI ships the cartridge and solvent line alongside the coder and holds spares against the models we sell.

Service radius is the second half of that question. A machine that needs a technician flown in is a machine with a two-week slowest case, and the number to write into the comparison is the response time actually offered rather than the one in the brochure.

The technology is continuous inkjet in both cases, so the physics does not change between brands: the differences are in the pump design, the fluid handling and the local support.

What the Switch Actually Costs

Three costs are usually left out of the comparison. The first is requalification: a customer who has approved a code layout may want a new sample before the line runs. The second is training, because an operator who knew the old menu is a beginner on the new one. The third is spares duplication while both machines are still on site.

Those three are manageable if they are planned and expensive if they are discovered. A trial on one line, with a signed sample and a written setting, converts the switch from a decision into a schedule.

Our own builds are inspected under the ISO 9001 quality management route, and the S1000 is the model most single-line switches land on: a small character inkjet printer rated to 400 metres a minute with a 2 to 20 mm print height.

Buyer Questions

Can I keep the existing mounting
Often yes, and the bracket is the first thing to measure, since a new head on the old plate saves a day of installation.
Will the code look different
Slightly, because dot placement differs between platforms, so the approved layout should be re-sampled.
How long does a switch take
One line in a weekend, a plant in a quarter, and the plan should name the sign-off per line.

Ask for a Marked Sample of Your Own Product

Send one product from the line and the block it carries. We will mark it, scan it, and return it with the fluid grade and setting written down, so the comparison against your current coder is made on your product. Samples are free and there is no commitment to order.

Next Steps