Last Updated: 2026-10-02
A mark read across a yard is a different problem from one read at a bench. An alternative to Matthews for large character work is judged on four demonstrations: height held on an uneven face, a grade that survives the surface it lands on, a gap wide enough for the stock, and a consumable route that reaches your site.
What Large Character Work Is Hard About
Big marks are a volume problem before they are an electronics problem. Covering 76.2 mm or 101.6 mm means splicing heads, which lays down more ink per meter of product, lengthens the time that film stays open, and pushes the head farther from the face so that every millimeter of product bounce shows in the result. On construction stock the surface adds dust, moisture and a coating no datasheet describes.
That is why height and working gap have to be agreed before a machine is discussed, and why both established suppliers and factory-direct builders can pass a brochure test and fail a wet Tuesday on the yard.
Four Proofs on Your Own Stock
| Proof | What it settles | SHICAI build that carries it |
|---|---|---|
| Height on an uneven face | Whether the block lands complete in one pass | S10-6 splices to 2-76.2mm print height; S20-4 reaches 101.6 mm |
| Stand-off tolerance | How much bounce and camber the placement absorbs | P70 runs a 2-15mm throw distance for irregular stock |
| Grade against the surface | Whether the mark survives handling and weather | Marks metal, plastic, pipe, foam and carton, with seven ink colors |
| Yard work with no line | Marking goods that cannot be conveyed | AL16 prints 25-60mm large characters hand-held and weighs 1.6 kg |
Two Ways to Buy an Alternative to Matthews
A distributor-held brand gives you a technician nearby and a parts shelf, and prices that service into the machine. A factory-direct builder gives you the engineers who assembled the unit and a separate price for machine and consumables, at a longer distance to answer a call. Neither wins by default. Compare the wear list, the dispatch time and what a demonstration actually covered, and ask that the build record sit under ISO 9001 quality management. The mechanics of droplet placement give a neutral yardstick when two catalogues describe the same duty differently.
Frames for the Duty
S10-6 online inkjet printer (splicing)
where the face has to be covered wide:
- 2-76.2mm print height
- 2-5mm throw distance
- Prints Chinese, English, date, QR code and barcode
P70 Online inkjet printer
for irregular stock needing a longer gap:
- Print speed 1-100m/min
- 3-71.8mm print height
- 2-15mm throw distance
AL16 Large character inkjet printer
when nothing can be conveyed at all:
- 25-60mm print height
- Weighs only 1.6 kg
- Built-in air pump ink supply
Where the block also has to carry variable data, the spliced frames print text, date, QR code and barcode in the same pass, so a case code and its scannable twin stay on one layout. Our method for choosing between builds is published as five checks before switching a large character coder and TIJ against CIJ compared by technology.
Switching questions
- What must an alternative to Matthews prove first?
- Height on an uneven face. Large character work on concrete pipe, timber or rebar is printed on a surface that is dusty, irregular and often wet, so coverage and stand-off decide the result before any software feature enters the conversation.
- Does a large character mark need a different ink?
- It needs the grade the surface demands and enough of it. A tall block on porous board soaks ink quickly, while coated steel or plastic holds the droplet on top and needs a slower grade with a real drying window before handling.
- Can large character marking be done away from a line?
- Yes, where the machine carries its own ink supply. A hand-held build with a built-in air pump prints 25 to 60 mm characters on stock that cannot be lifted onto a conveyor, which is the yard and rework case rather than the production run.
Where to start
Send a piece of your stock, the height you need and where the mark has to be read from. We print it, knock it about the way handling will, then quote the head count, the grade and the wear items in writing, and say plainly if an incumbent suits your site better. Start from the contact page, free of charge.
