Last Updated: 2026-10-30

A change of coder is usually forced by lead time, not by print result. Choosing an alternative to Control Print should therefore start with the four numbers your existing line already runs on: belt speed, block size, fluid consumption and the response time you have been given.

What an Alternative to Control Print Actually Changes

Very little of the print result moves. A continuous inkjet head deflects a charged drop stream the same way whatever badge sits on the cabinet, and the code that lands on a carton is decided by nozzle size, ink grade and trigger timing.

What does move is everything around the head: how fast a technician reaches the plant, how long a spare pump takes to arrive, and what the invoice looks like across a five-year run.

A fair alternative to Control Print is one that matches the print behaviour on your substrate and changes the service and supply terms, not the physics.

Five Tests to Run Before a Switch

Test What to measure Why it decides the order
Trigger window Block passes the head in under a tenth of a second at line speed Missed triggers show as a shifted code, not a blank one
Fluid band Consumption per thousand marks, in millilitres The ink bill outlives the purchase invoice
Spares cycle Days to a pump or a filter, quoted in writing A two-week wait stops a line that was running
Interface RS232, TCP/IP or a dry contact already on the line A converter box is a new failure point
Signed sample Your substrate, your code, dated and kept Installation becomes a comparison, not a debate

The first row is where most installations go wrong, and it is rarely the head. A sensor bracket bolted to a vibrating guard moves a millimetre a week, which at line speed puts a date block on the flap.

The second row survives the warranty. Fluid per thousand marks compares platforms fairly, while an ink price per litre does not, because throw distance and character height change the volume delivered.

Fluid, Make-Up and the Service Band

A continuous inkjet system circulates ink through a nozzle and a gutter, so it needs make-up fluid to hold viscosity. That circulation is why the service band matters more than the print spec: fluid replenished, gutter cleaned and filter changed on a schedule the plant can keep.

Ask what the daily and monthly routine costs in hours, and who performs it. A routine needing a technician twice a month is a different operating cost from one an operator can flush at shift end.

The print side is documented in the continuous inkjet reference, and a build should follow the ISO 9001 quality management route.

How SHICAI Fits the Same Line

SHICAI builds small-character and online systems for export markets, with the same print behaviour on a given substrate and a supply chain organised around factory-direct delivery. Where a regional distributor holds stock, the same comparison should be run on spares lead time rather than on brand history.

In our export work the repeated surprise is the interface, not the print. A line that already speaks a dry contact needs no protocol work, and assuming otherwise buys a converter nobody needed.

The Unit Most Small-Character Lines Land On

alternative to Control Print - S1000 small character inkjet printer

S1000 small character inkjet printer

the continuous build for fast lines and small blocks:

  • Prints up to 400 Meters Per Minute
  • 2-20mm print height
  • 10.1-Inch Industrial Touchscreen
  • 3-30mm throw distance
  • Low 120W rated power

The throw distance decides mounting. At 3 to 30 mm the head sits outside a guard rail and still writes a clean block, which is the difference between weekly cleaning and cleaning after a failed code.

Send the Code Your Line Already Prints

Can the same ink be reused
Only against the substrate and the temperature it will meet, so the sample decides.
How long is a spares order
Quoted in writing per part, and that figure belongs in the comparison table.
Does it need compressed air
No, the head deflects drops electrically, which is why the footprint stays small.

Send the code your line prints today, on the board it prints on, plus the belt speed at the head. We will mark it, photograph the block at reading distance and return the setting, so an alternative to Control Print is judged on your own carton rather than on a sample shelf.

Next Steps