Last Updated: 2026-10-28
Choosing a TIJ printer manufacturer is rarely a problem of finding one, it is a problem of qualifying one before the purchase order goes out. Thermal inkjet coders are simple machines built around a cartridge, so the differences that matter sit outside the datasheet: who supplies the cartridge in year three, how print head life is quoted, what the minimum order really is, and whether anyone answers in your time zone.
What a TIJ Printer Manufacturer Actually Supplies
A TIJ coder is a controller, a print head and a cartridge. The head is often the same component across three brands, which is why a price difference between two quotations is rarely about the head and usually about the controller, the enclosure and what arrives in the crate with it.
We build the controller, the mounting hardware and the enclosure, and we ship the cartridge as a consumable line with the machine. A buyer who is told the cartridge is available anywhere should ask which grade, because a water-based cartridge for porous cartons and a solvent grade for film are not interchangeable and the head does not forgive the difference.
Support is organised for export markets: documentation in English, spares held against the models we sell, and a technical reply inside 24 hours on a working day. That is the part of a manufacturer’s offer that does not appear in a specification table.
Six Checks Before You Wire the PO
| Check | What to ask | Red flag |
|---|---|---|
| Cartridge supply | Which grades, which volumes, which lead time | No grade list in writing |
| Head life | Quoted in dots or in months, and against which ink | A single figure for all inks |
| MOQ and mix | Whether a mixed-model order is accepted | MOQ per model, not per order |
| Lead time | Days to ship, and what is stocked | A date with no model named |
| Spares | Which parts are held for five years | Consumables only |
| Documentation | Manual, wiring diagram, error code list | A quick-start card only |
The second row is the one that changes a cost model. Head life quoted in months tells a buyer nothing when the same head runs a date line on kraft board and a dense QR code on film, because the second job uses several times the dots.
The third row catches buyers who plan a mixed fleet. If the minimum applies per model, a line that needs two wide heads and one narrow one may not qualify for the price that was quoted.
The TIJ Range We Ship
The range covers a single narrow head for cartons up to a wide multi-head build for large panels, all on the same cartridge family so a plant does not have to stock several consumable types:
- Y110 Online inkjet printer for a first line, with a 2 to 12.7 mm height and a 3.0 kg body.
- T110-Mini online inkjet printer for tight installations, up to 100 m/min at 600 dpi.
- K20 online inkjet printer for a 25.4 mm block on a single head.
- S10-2 online inkjet printer (standalone) where a standalone controller is easier to mount.
- S10-4 online inkjet printer (standalone) for a 50.8 mm print height from one controller.
A mixed order across these models is normal for us, and the cartridge is shared, which is the practical argument for buying a fleet from one manufacturer rather than three.
Quality, Testing and Compliance
Every unit is powered, print-tested and photographed before packing, and the test record travels with the shipment. Inspection follows the ISO 9001 quality management route rather than an in-house sheet, which matters when a buyer’s own auditor asks for a supplier file.
The technology itself is inkjet printing on demand, so there is no make-up fluid, no solvent top-up and no nozzle purge cycle to schedule. Fewer fluids means fewer failure modes on a line that runs one shift a day and stands idle for a fortnight.
Buyer Questions
- What is the minimum order
- One unit for a trial, and mixed models on a single order once a line is being equipped.
- Can you brand the enclosure
- Yes on volume orders, with the artwork approved before production rather than after.
- How long is the warranty
- Twelve months on the controller and the head assembly, with cartridge faults handled case by case.
Ask for a Quote With Your Line Details
Send the substrate, the block height and the line speed, and we will answer with the model, the cartridge grade and the mounting height instead of a catalogue page. Quotes are free, there is no commitment to order, and we reply within 24 hours.
Next Steps
- Compare the head options in TIJ vs CIJ vs laser compared.
- Start at the contact page, on +86 17625427465 or kuangcy@126.com.
